To Next PageTo Next PageHow to fix toner specks on Lexmark E 240 Printer?
Toner specks on your Lexmark printouts can be caused by a defective toner cartridge, a worn or defective fuser, or toner in the paper path. To address this, try the following: replace the toner cartridge, replace the fuser. If the issue persists, call for service.
Why is my Lexmark Printer printing too dark?
If your Lexmark printer is printing too dark, it could be because the Toner Darkness setting is too dark or the toner cartridge is defective. To solve this, select a different Toner Darkness setting from the printer driver or replace the toner cartridge.
Why is my Lexmark Printer printing too light?
If your Lexmark printer is printing too lightly, it could be due to several reasons: * The Toner Darkness setting is too light. * You are using paper that does not meet the printer specifications. * The toner cartridge is low on toner. * The toner cartridge is defective. To fix this, try these solutions: Select a different Toner Darkness setting from the printer driver, load paper from a new package, avoid textured paper, make sure the paper you load in the trays is not damp, and replace the toner cartridge.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 24 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 10, 000 pages |
| Standard Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Duplex Printing | Manual |
| Supported Operating Systems | Windows, Mac OS, Linux |
| Output Tray Capacity | 100 sheets |
| Media Sizes Supported | Letter, Legal, A4, A5, B5 |
| Media Types Supported | Plain Paper, Envelopes |
Instructions for installing printer software on Windows operating systems.
Steps for installing printer software on Macintosh operating systems.
Guidance for installing printer software on UNIX and Linux platforms.
Procedures for configuring printers for direct or shared network printing in Windows.
Steps to set up network printing for Macintosh computers.
Instructions for network printing on UNIX and Linux environments.
Steps for assigning an IP address to the printer for network connectivity.
Information on what supplies are needed and how to order them.
Step-by-step instructions for replacing the printer's toner cartridge.
Procedure for replacing the photoconductor kit in the printer.
