7
IPDS Printer and Host Setup Guide iSeries and AS/400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server
Press PF9 to show the following parameters:
Example PSFCFG with parameters to change shown in bold.
PSF configuration PSFCFG >
IPDSPRT1
(Note: IPDSPRT is a user defined name.)
Library............................... >
Your LIB
User resource library list.. USRRSCLIBL *JOBLIBL
Device resource library list DEVRSCLIBL *DFT
+ for more values
IPDS pass through..................... IPDSPASTHR >
*NO <note1>
Activate release timer................ ACTRLSTMR *NORDYF
Release timer......................... RLSTMR >
*SEC15 <note2>
Restart timer......................... RESTRTMR *IMMED
APPC and TCP/IP retry count........... RETRY 15
Delay time between APPC retries....... RETRYDLY 90
Acknowledgement frequency............. ACKFRQ 100
Printer response timer................ PRTRSPTMR *NOMAX
Generate PDF output................... PDFGEN *NONE
Save AFP data AFPSAVE *NO
Text 'description'.................... TEXT >
'PSFCFG for IPDS
Printer'
(Note: ‘PSFCFG for IPDS Printer’ is user defined text.)
Press PF10 to show the following parameters:
Additional Parameters
Automatic session recovery: AUTOSSNRCY
Enabled........................... *NO
Message option....................
Blank page............................ BLANKPAGE *YES
Page size control..................... PAGSIZCTL *NO
Resident fonts........................ RESFONT *YES
Resource retention.................... RSCRET *YES
Edge orient........................... EDGEORIENT *NO
Use outline fonts..................... USEOUTLFNT
*NO
<note3>
PSF defined option.................... PSFDFNOPT *NONE
Font substitution messages............ FNTSUBMSG *YES
Capture host fonts at printer......... FNTCAPTURE
*NO
<note4>
Font resolution for formatting........ FNTRSL *SEARCH
Font mapping table.................... FNTTBL *NONE
Library.............................
Cut sheet emulation mode.............. CSEMODE *NONE
Use DBCS simulation fonts............. MAPIGCFNT *NO
Replace............................... REPLACE *YES
Authority............................. AUT *LIBCRTAUT
Cut sheet emulation mode..............
Use DBCS simulation font..............
Generate PDF output...................
*NONE
*NO
*NONE
PDF device emulation type.............
PDF paper size drawer 1...............
> *IP40240
*LETTER
To Next Page
Loading...
Need help?
General