What to do if my Lexmark 7500 Printer page does not print?
If your Lexmark Printer is not printing pages, first, check for any messages displayed. Also, check the power connection and ensure paper is loaded. Verify ink levels and that cartridges are correctly installed. Review the printer's default and pause settings. As additional steps, you can try reconnecting the power supply or removing and reinstalling the software.
How to troubleshoot a Lexmark Printer when the power button is not lit?
If the power button on your Lexmark Printer is not lit, try pressing the power button. If that doesn't work, disconnect and then reconnect the power cord.
What to do if I cannot print from my digital camera using PictBridge on my Lexmark 7500?
To print from a digital camera using PictBridge on your Lexmark Printer, first enable PictBridge printing from the camera settings. Ensure that the camera is PictBridge-enabled. Check the USB cable connecting the camera to the printer. Remove any memory cards from the printer and check for any messages displayed on either device.
How to fix Lexmark Printer software that does not install?
If the software for your Lexmark Printer won't install, verify that your operating system and system requirements meet the necessary specifications. Check the USB or wireless connection. You may also want to try reinstalling the software, reconnecting the power supply, disabling anti-virus programs, or uninstalling and then reinstalling the software.
How to change the language on my Lexmark Printer display?
To correct the language appearing on the display of your Lexmark Printer, change the language selection during the initial setup. Alternatively, select a different language after the initial setup is complete.
To Next Page
General