Repair information 4-13
5025-2xx, 4xx
Top cover assembly removal
See “Top cover assembly” on page 7-3 for the part number.
1. Remove the right cover assembly. See “Right cover assembly removal” on page 4-12.
2. Remove the waste toner bottle. See “Waste toner bottle removal” on page 4-81.
3. Remove the imaging unit. See “Imaging unit (IU) removal” on page 4-49.
4. Remove the rear shield. See “Top cover assembly removal” on page 4-13.
5. Disconnect the fan cable from JFAN1 (A) on the controller board.
6. Remove the screw (B).
To Next Page
Loading...
