Lexmark C760 - Page 150

PJL
3-71
Intervention required:
cartridge low
40038 88 Cartridge Low
<CMYK>
FALSE
Intervention required:
replace photoconductor kit
40038 Replace PC Kit FALSE
Intervention required:
replace photoconductor kit to continue
40038
Replace PC Kit To Continue FALSE
Intervention required:
replace toner cartridge
40038
Replace Toner Cartridge FALSE
Intervention required:
replace toner cartridge to continue
40038 Replace Toner To Continue FALSE
Intervention required:
replace oil coating roll
40038
Replace Oil Coating Roll FALSE
Intervention required:
cartridge empty
40039
89 Cartridge Empty
<CMYK>
FALSE
Intervention required:
load staples
40040 Load Staples FALSE
Intervention required:
priming failed. retry?
40041
Priming Failed. Retry? FALSE
Intervention required:
OPMSG
40048 Message specified by OPMSG FALSE
Intervention required:
STMSG
40049 Message specified by STMSG FALSE
Intervention required:
replace fuser
40050
Replace Fuser FALSE
Intervention required:
replace transfer kit
40050
Replace Transfer Kit FALSE
Intervention required:
incompatible bin x
40087
59 Incompatible Bin x FALSE
Intervention required:
incompatible duplex
40088
59 Incompatible Duplex FALSE
Intervention required:
incompatible tray x
40089
59 Incompatible Tray x FALSE
Intervention required:
incompatible envelope feeder
40090 59 Incompatible Envelope Feeder FALSE
Intervention required:
check duplex connection
40095
Check Duplex Connection FALSE
Table 3-14: PJL Message for Attendance Conditions
Printer State Status Code Display String Online Status
1
XXXX represents a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow and Black cartridges,
respectively. For this message, the values for XXXX are returned to indicate which ink cartridges are defective.
2
<d> represents a one-letter designator for each door labeled on the printer.
3
<c> represents a one-letter designator for each cover labeled on the printer.
Note: The Display String is returned in the current language. A display string that is returned is truncated to the DISPLAY
CHARACTER SIZE returned in INFO CONFIG.