Lexmark C760 - Electrical Specifications; Power Requirements

Specifications
7-2
Electrical Specifications
Warning: Lexmark recommends that you do not use voltage converters with printers.
Power Requirements
The following tables list the nominal average power requirements (including fuser
power).
Table 7-2: Printer Electrical Specifications
Printer Model Electrical Specification
C760, C762 (low voltage model) 100
—127 V at 47/63 Hz
C760, C762 (high voltage model) 220—240 V at 47/63 Hz
Printer Model C760, C762 C760, C762 (n) C760, C762 (dn), (dtn)
State 100 V 120 V 230 V 100 V 120 V 230 V 100 V 120 V 230V
Average
continuous
printing
650 W 650 W 650 W 830 W 650 W 650 W 650 W 650 W 650 W
Average
continuous
copying
–––––––––
Average
continuous
scanning
–––––––––
Idle without
Power Saver
(Standby)
180 W 180 W 180 W 190 W 190 W 190 W 190 W 190 W 190 W
Idle with Power
Saver
30 W 30 W 30 W 30 W 30 W 30 W 30 W 30 W 30 W
Rated short
term current
12.3 A 10.2 A 5.2 A 12.3 A 10.2 A 5.2 A 12.3 A 10.2 A 5.2 A
Note: Power requirements for network models may differ.
Note: his value is <19 W for units manufactured after 4/30/2004.