Lexmark C760 - Operator Intervention - Paper Handling

PJL
3-72
Operator Intervention - Paper Handling
When a Load <tray>, Load Manual, or Change <tray> message appears on the printer
operator panel display or through MarkVision Professional, a message is returned to
the host computer indicating the paper source and size for the prompt.
Attendance (operator intervention) messages are returned in this form:
CODE=status code
DISPLAY=display string (in double quotes)
ONLINE=online status
The display string is the first line of the message that displays.
Intervention required:
install duplex or cancel job
40095 Install Duplex or Cancel Job FALSE
Intervention required:
duplex cover open
40096 Close Duplex Door FALSE
Intervention required:
insert duplex option
40096
Insert Duplex Option FALSE
Intervention required:
load staples
40101
Load Staples FALSE
Table 3-14: PJL Message for Attendance Conditions
Printer State Status Code Display String Online Status
1
XXXX represents a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow and Black cartridges,
respectively. For this message, the values for XXXX are returned to indicate which ink cartridges are defective.
2
<d> represents a one-letter designator for each door labeled on the printer.
3
<c> represents a one-letter designator for each cover labeled on the printer.
Note: The Display String is returned in the current language. A display string that is returned is truncated to the DISPLAY
CHARACTER SIZE returned in INFO CONFIG.