Lexmark C760 - Page 249

PostScript
4-72
Table 4-11: PostScript Emulation Device Parameters
Key Type Definition
Device Parameters for the Communication Device %Parallel%, %ParallelA%, %ParallelB%, %ParallelC%, %ParallelD%
(%Parallel_NV% and %Parallel_Pending% contain the same parameters)
DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are:
True An end-of-file message is not sent until the current job and all preceding jobs
finish printing.
False An end-of-file message is sent as soon as a job finishes executing in the
interpreter, whether or not that job has finished printing.
This value is set independently for each port.
Enabled boolean (Read-only)
Supported values are:
True
False
Filtering name Indicates if the input needs further filtering before the data can be correctly processed.
Supported values are:
InterpreterBased
None
Handshake integer (Read-only) Always returns a value of 2.
HasNames boolean (Read-only) Always returns False.
Interpreter name (Read-only)
Supported values are:
PostScript
AutoSelect
PCL
PPDS
On boolean Designates if the communication channel is On and able to receive and send data.
Supported values are:
True Data is sent and processed
False Data is lost
OutputDevice string (Read-only)
PCLSmartSwitch boolean Supported values are:
True
PCL SmartSwitch is set to On.
False
PCL SmartSwitch is set to Off.
For more information, see “Using SmartSwitch” on page 2-1.
PortLocation string (Read-only) Designates the physical location of the port related to the parameter set.
Supported values are:
Standard Port
Option Slot 1
Option Slot 2
Option Slot 3
Option Slot 4