Lexmark C792 - Page 38

• Sub‑policies for single‑function printers are created using their respective device classes, but you must select No
Scan to enable deploying a profile to single‑function printers.
• Scan Settings, Profile buttons, Shortcut Number, and Access Control Number do not apply to software clients, so
those settings are not available when Software is selected.
To reset all settings for a sub‑policy, click Reset beside the Device Group list. While editing properties, click Clear to
revert to the properties last saved for the profile, or Save to save the new properties.
Note: Changes in a sub‑policy must be saved before selecting a different Device Group. If the sub‑policy has been
changed and you select a different Device Group, then you are asked whether to save changes to the current
sub‑policy.
The following table shows the properties available for each device profile:
Device profile properties and their descriptions
Property Description
Key The name used to access the profile from a script. The key applies to the policy as a whole and
does not vary for sub‑policies.
Name The name used for the profile in Lexmark Management Console
Note: For a profile used with a Lexmark Document Server Port, the name must be 14 or fewer
characters.
Task The script associated with the policy
No Scan (e‑Task and
e‑Task 2)
Indicates whether a scan task is part of the solution. A profile can be deployed to a single‑function
printer only when No Scan is selected.
Setting (e‑Task and
e‑Task 2)
The setting type to add to or edit in the list of settings. See the following table of setting types for
a description of each type and available values.
Mapped (e‑Task and
e‑Task 2)
Determines whether the setting is mapped to a solution setting defined in solutionSettings.ldd
Value (e‑Task and
e‑Task 2)
The value of the setting to add to or edit in the list of settings. See the following table of setting
types for the available values for each setting type.
Overrideable (e‑Task
and e‑Task 2)
Determines whether the user at the printer can override the setting when the solution is run
Shortcut Number The shortcut number by which a user can access the profile from the printer
Access Control Number The number used to assign access controls specifically to the profile, using one of the Solution 1–
10 settings in the printer Embedded Web Server
The following table shows the setting types available for device profiles:
Setting types and their available values
Type Available values
Content Type
• Text
• Photo
• Mixed
Developing workflow solutions 38