Lexmark C792 - Page 59

Property Description Default
basic.pj.save Determines whether to save print
jobs from the LDD system
false
basic.pj.poolSize The size of the thread pool to use for
print jobs. The default, which refers
to the overall server pool size,
should usually remain set.
${CurrentTestProfile.serverPoolSize}
Advanced (e‑Task 2) prompting print job properties
Property Description Default
advanced.pj.addressRange The address range to
receive print jobs from the
LDD system. The default,
which refers to the address
range set for the overall
test, should usually remain
set.
${CurrentTestProfile.advanced.addressRange}
(This refers to the advanced.addressRange property in the
Basic prompting properties table.)
advanced.pj.output The folder where
simulated print jobs should
be saved
The /Profiles/CurrentTestProfile/conf/data/P
rintJobs folder where the MFP emulator and performance
simulator are installed
advanced.pj.ext The file extension of saved
print jobs. Do not include a
period (.) before the
extension. The extension
implies the file type used.
One of the following: pdf,
ps, tif.
ps
advanced.pj.save Determines whether to
save print jobs from the
LDD system
false
advanced.pj.poolSize The size of the thread pool
to use for print jobs. The
default, which refers to the
overall server pool size,
should usually remain set.
${CurrentTestProfile.serverPoolSize}
Delay properties
Property Description Default
clientStartUpDelay The delay, in milliseconds, between starting each group of
emulated MFPs when testing with more than one MFP
500
clientStartUpDelaySize The number of MFPs to start after each interval specified by
clientStartUpDelay
10
startDelayMin
*
The minimum delay between test repetitions
2000
* The delay properties are useful in simulating real‑world delays where user input is expected when stress‑testing a solution.
For each delay specified, a random value is selected between the minimum and maximum values.
Testing and deploying workflow solutions 59