Lexmark C950 Print Defects Guide

Print defects guide
Repeating defects measurements
Match a set of repeating defects on a print job to the marks on one of the vertical lines to determine whether a photoconductor
unit is defective. The color of the repeating print defects indicates which photoconductor unit is causing the defect.
Note: Make sure the current selection in the printer for Scale to Fit in the PDF menu is set to No for the rulers to be printed at
the correct size.
Change the photoconductor unit if the repeating defects appear in these instances:
Every 94.2 mm (3.71 in.) of the page Every 37.68 mm (1.48 in.) of the page Every 31.4 mm (1.24 in.) of the page
Note: The printer has four photoconductor units. Replace the photoconductor unit that has the same color as the repeating print
defect.
Print defects guide
Page 1 of 1

Lexmark C950 Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor Speed	1.2 GHz
Connectivity	Ethernet, USB
Print Technology	Laser
Print Speed	50 ppm
Monthly Duty Cycle	300000 pages
Recommended Monthly Page Volume	5, 000 - 33, 000 pages
Memory	1024 MB
Hard Drive	Optional
Output Capacity	500 sheets
Interface	USB 2.0
Media Type	Plain paper, Card stock, Labels, Envelopes, Transparencies
Total Media Capacity	5140 sheets
Media Sizes	Letter, Legal, A4, A5, Executive, Folio, Statement
Operating Systems Supported	Windows, Mac, Linux