Bin 1
• The paper capacity is 3,000 sheets when the standard finisher is installed.
• The paper capacity is 1,500 sheets when the booklet finisher is installed.
Bin 1 finishing features
Size
Punch
*
Offset Single/Double staple Double dual staple
A3
A4
A5 X X X X
Executive
X
Folio X
X
JIS B4
X
JIS B5
X
Legal X
X
Letter
Statement X X X
Tabloid X
Universal
Envelopes (any size) X X X X
*
For the Universal paper size, the finishing edge must be at least 9 in. (229 mm) for a 3‑hole punch and 10 in. (254 mm) for
a 4‑hole punch.
Punch—Select from two‑, three‑, or four‑hole punch
Single staple—Use only one staple
Double staple—Use two staples
Double dual staple—Use two sets of two staples. This setting is supported only for widths between 8 in. (203 mm) and
12 in. (297 mm) with lengths between 7 in. (182 mm) and 17 in. (432 mm).
Bin 2 (booklet‑maker)
Bin 2 is available only when the booklet finisher is installed. The paper capacity of Bin 2 (booklet‑maker) is 300 sheets
or 20 sets of 15‑sheet booklets.
Paper and specialty media guide 88
To Next Page
Loading...
