Lexmark CS410 Quick Reference Guide

• Do not slide the paper into the tray. Load paper as shown in the
illustration.
• Make sure the guides in the tray or the multipurpose feeder are
properly positioned and are not pressing tightly against the paper
or envelopes.
• Push the tray firmly into the printer after loading paper.
Use recommended paper
• Use only recommended paper or specialty media.
• Do not load wrinkled, creased, damp, bent, or curled paper.
• Flex and straighten paper before loading it.
• Do not use paper that has been cut or trimmed by hand.
• Do not mix paper sizes, weights, or types in the same tray.
• Make sure the paper size and type are set correctly on the computer
or printer control panel.
• Store paper per manufacturer recommendations.
Understanding jam messages and
locations
When a jam occurs, a message indicating the jam location and
information to clear the jam appears on the printer display. Open the
doors, covers, and trays indicated on the display to remove the jam.
Note: When Jam Recovery is set to On or Auto, the printer reprints
jammed pages. However, Auto does not guarantee that the page will
print.
7
6
3
2
4
1
5
Jam location Message on the
display
What to do
1 Standard bin [x]‑page jam, clear
standard bin. [203.xx]
Remove the jammed
paper.
2 Fuser [x]‑page jam, open
front door to clear
fuser. [202.xx]
Open the front door,
pull the tab and hold
the fuser cover
down, and then
remove the jammed
paper.
3 Front door [x]‑page jam, open
front door. [20y.xx]
Open the front door,
and then remove the
jammed paper.
Jam location Message on the
display
What to do
4 Duplex [x]‑page jam, open
front door to clear
duplex. [23y.xx]
Open the front door,
and then remove the
jammed paper.
5 Tray [x] [x]‑page jam, open
tray [x]. [24y.xx]
Pull the indicated
tray out, and then
remove the jammed
paper.
6 Manual feeder [x]‑page jam, clear
manual
feeder. [251.xx]
Remove the jammed
paper.
7 Multipurpose
feeder
[x]‑page jam, clear
multipurpose
feeder. [250.xx]
Push the paper
release lever to lift
the paper rollers,
and then remove the
jammed paper.
[x]‑page jam, clear standard bin.
1 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
2 From the printer control panel, touch to clear the message
and continue printing. For non‑touch‑screen printer models, select
Next > Clear the jam, press OK, and then press
to confirm.
8

Lexmark CS410 Specifications

General

Print Technology	Color Laser
Print Resolution	1200 x 1200 dpi
Standard Memory	256 MB
Processor Speed	800 MHz
Standard Input Capacity	250 sheets
Connectivity	USB, Ethernet
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	75, 000 pages
Maximum Memory	2304 MB
Duplex Printing	Yes
Mobile Printing	Yes