Use To
Manual Color
RGB Image
RGB Text
RGB Graphics
Customize the RGB color conversions.
Select from the following options:
Vivid
sRGB Display
Display—True Black
sRGB Vivid
Off
Notes:
• sRGB Display is the factory default setting for RGB Image. This applies a color conversion
table to an output that matches the colors displayed on a computer monitor.
• sRGB Vivid is the factory default setting for RGB Text and RGB Graphics. This applies a
color table that increases saturation. This is preferred for business graphics and text.
• Vivid applies a color conversion table that produces brighter, more saturated colors.
• “Display—True Black” applies a color conversion table that uses only black toner for
neutral gray colors.
• Off turns off color conversion.
Manual Color (continued)
CMYK Image
CMYK Text
CMYK Graphics
Customize the CMYK color conversions.
Select from the following options:
US CMYK
Euro CMYK
Vivid CMYK
Off
Notes:
• US CMYK is the factory default setting. This applies a color conversion table that tries to
produce output that matches SWOP color output.
• Euro CMYK is the international factory default setting. This applies a color conversion
table that tries to produce output that matches Euroscale color output.
• Vivid CMYK increases color saturation for the US conversion table.
• Off turns off color conversion.
Spot Color Replacement Assign specific CMYK values to named spot colors.
Note: This menu is available only in the Embedded Web Server.
Color Adjust Initiate a recalibration of color conversion tables and allow the printer to make adjustments
for color variations in output.
Notes:
• Adjusting color starts when the menu is selected. Adjusting color appears on the
display until the process is finished.
• Color variations in output sometimes result from changeable conditions such as room
temperature and humidity. Color adjustments are made on printer algorithms. Color
alignment is also recalibrated in this process.
Color quality guide
Page 3 of 6
To Next Page
Loading...
Need help?
General
