Lexmark CS531dw - Paper Jam in Door a

Jam locations
4 Manual feeder
Paper jam in door A
Paper jam below the fuser
1 Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
Warning—Potential Damage: To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of the
printer.
2 Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3 Close door A.
Paper jam in the fuser
1 Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
Warning—Potential Damage: To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of the
printer.
2 Open the fuser access door, and then remove the jammed
paper.
Note: Make sure that all paper fragments are removed.
3 Close door A.
Paper jam in the duplex unit
1 Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
9