Error code Description Action
243.35 Paper fed from tray 3 cleared the sensor (tray 3
pass-through) or the sensor (tray 3 trailing edge)
later than expected.
See
“Sensors (tray [x] trailing edge and
pass-through): Paper cleared too late
service check” on page 138.
243.36 Paper fed from tray 3 was picked but it never
arrived at the sensor (tray 3 trailing edge).
See
“Sensor (tray [x] pass-through): Tray [x]
failed to pick service check” on page 141.
243.37 Paper fed from tray 3 never cleared the sensor
(tray 3 trailing edge).
See
“Sensors (tray [x] trailing edge and
pass‑through): Paper failed to clear service
check” on page 143.
243.38 Paper fed from tray 3 was detected later than
expected at the sensor (tray 3 pass-through) or at
the sensor (tray 3 trailing edge).
See
“Sensors (tray [x] trailing edge and
pass-through): Paper arrived too late
service check” on page 145.
243.41 Paper fed from tray 4 remains detected at the
sensor (tray 3 pass‑through) or at the sensor (tray
3 trailing edge) after the printer is turned on.
See
“Sensors (tray [x] trailing edge and
pass-through) static jam service check” on
page 129 .
243.42 Paper fed from tray 4 was detected earlier than
expected at the sensor (tray 3 pass-through) or at
the sensor (tray 3 trailing edge).
See
“Sensors (tray [x] trailing edge and
pass‑through): Paper arrived too early
service check” on page 130.
243.43 Paper fed from tray 4 never arrived at the sensor
(tray 3 pass-through).
See
“Sensor (tray 3 pass-through): Paper
failed to arrive service check” on page
134.
243.44 Paper fed from tray 4 cleared the sensor (tray 3
pass-through) or the sensor (tray 3 trailing edge)
earlier than expected.
See
“Sensors (tray [x] trailing edge and
pass-through): Paper cleared too early
service check” on page 137.
243.45 Paper fed from tray 4 cleared the sensor (tray 3
pass-through) or the sensor (tray 3 trailing edge)
later than expected.
See
“Sensors (tray [x] trailing edge and
pass-through): Paper cleared too late
service check” on page 138.
243.47 Paper fed from tray 4 never cleared the sensor
(tray 3 trailing edge).
See
“Sensors (tray [x] trailing edge and
pass‑through): Paper failed to clear service
check” on page 143.
243.48 Paper fed from tray 4 was detected later than
expected at the sensor (tray 3 pass-through) or at
the sensor (tray 3 trailing edge).
See
“Sensors (tray [x] trailing edge and
pass-through): Paper arrived too late
service check” on page 145.
243.91 Paper remains detected at the sensor (tray 3
pass‑through) or at the sensor (tray 3 trailing
edge) after the printer is turned on. Paper source
is undetermined.
See
“Sensors (tray [x] trailing edge and
pass-through) static jam service check” on
page 129 .
243.92 Paper was detected earlier than expected at the
sensor (tray 3 pass-through) or at the sensor (tray
3 trailing edge). Paper source is undetermined.
See
“Sensors (tray [x] trailing edge and
pass‑through): Paper arrived too early
service check” on page 130.
243.93 Paper never arrived at the sensor (tray 3 pass-
through). Paper source is undetermined.
See
“Sensor (tray 3 pass-through): Paper
failed to arrive service check” on page
134.
243.94 Paper cleared the sensor (tray 3 pass-through) or
the sensor (tray 3 trailing edge) earlier than
expected. Paper source is undetermined.
See
“Sensors (tray [x] trailing edge and
pass-through): Paper cleared too early
service check” on page 137.
5028
Diagnostic information
127
To Next Page
Loading...
