2
Adjust the guides to match the size of the paper that you are
loading.
Note: Use the indicators on the bottom of the tray to position
the guides.
3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side faceup.
•
For one
‑
sided printing, load letterhead faceup with the
header toward the front of the tray.
•
For two
‑
sided printing, load letterhead facedown with the
header toward the back of the tray.
•
Do not slide paper into the tray.
•
For plain paper, make sure that the stack height is below
the maximum paper fill indicator. Overfilling may cause
paper jams.
3
To Next Page
Loading...
Need help?
General
