200.xx paper jams
Error code Description Action
200.xx
Paper jam
A single page of media jam at the input (S2)
sensor.
Multiple pages of media are jammed at the
input sensor.
• Pull out tray 1.
• Remove the jammed page(s).
• If the problem persists, then see “200.xx Input (S2) sensor
service check” on page 42.
200.01
Paper jam
The input (S2) sensor is obstructed.
200.02
Paper jam
The input (S2) sensor was made early.
200.03
Paper jam
The input (S2) sensor did not make.
200.05
Paper jam
The input (S2) sensor did not break.
200.20
Paper jam
The staging motor has an error.
• Check the condition of the pick tires, and replace if necessary.
See “Pick tires removal” on page 309.
• See “147.xx Paper pick motor drive assembly service check”
on page 91.
200.21
Paper jam
200.22
Paper jam
201.xx
Paper jam
A software induced stoppage has occurred.
This should not happen in the field.
POR the printer.
7527
Diagnostic information
41
To Next Page
Loading...
