3 If necessary, configure other fax settings.
4 Fax the document.
Scheduling a fax
1 Load the original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to:
Fax > To > enter the fax number > Done
For non-touch-screen printer models, press
to navigate through the settings.
3 Select Send Time to configure the date and time, and then select Done.
If necessary,
configure
other fax settings.
4 Send the fax.
Creating a fax destination shortcut
Note: You may need administrative rights to create a shortcut.
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Shortcuts > Add Shortcut.
3 From the Shortcut Type menu, select Fax, and then
configure
the settings.
4 Apply the changes.
Changing the fax resolution
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, select Fax, and then enter the needed information.
3 In the Resolution menu, select a setting.
4 Send the fax job.
Adjusting the fax darkness
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, select Fax, and then enter the needed information.
Faxing 59
To Next Page
Loading...
