What to do if I cannot open Embedded Web Server Lexmark All in One Printer?
If you cannot access the Embedded Web Server on your Lexmark All in One Printer, ensure the printer is turned on and that all cable connections are secure. Verify that you are using a supported browser and have entered the correct printer IP address in the address field. If issues persist, contact your administrator.
What to do if the Embedded Web Server does not open on Lexmark CX860?
If the Embedded Web Server does not open for your Lexmark Printer, make sure the printer is turned on. Also, verify that you have installed a supported browser. Ensure that you are typing the correct printer IP address into the address field, and depending on your network settings, you might need to type “https://” instead of “http://” before the printer IP address. Finally, check and tighten the cable connections.
General| Print Technology | Color Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Speed (Letter, Black) | 60 ppm |
| Print Speed (Letter, Color) | 60 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Processor Speed | 1.6 GHz |
| Standard Output Capacity | 500 sheets |
| Print Speed (Black/White) | 60 ppm |
| Print Speed (Color) | 60 ppm |
| Monthly Duty Cycle | 350000 pages |
| Recommended Monthly Page Volume | 5, 000 - 50, 000 pages |
| Maximum Output Capacity | 500 sheets |
| Display | 10-inch Color Touchscreen |
| Connectivity | Ethernet, USB, Wi-Fi |
| Mobile Printing | Mopria, AirPrint |
| Standard Input Capacity | 650 sheets |
To Next Page
