Lexmark CX860 Series - Setting up and Using the Accessibility Features; Enabling Magnification Mode; Activating Voice Guidance; Adjusting the Voice Guidance Speech Rate

Setting up and using the accessibility features
Enabling Magnification mode
1 From the control panel, press and hold the 5 key until you hear a voice message.
2 Select
Magnification
.
3 Select OK.
For more information on navigating a magnified screen, see
“Navigating the screen using gestures” on
page 25.
Activating Voice Guidance
From the control panel
1 Press and hold the 5 key until a voice message is heard.
2 Select OK.
From the keyboard
1 Press and hold the 5 key until a voice message is heard.
2 Press Tab to navigate the focus cursor to the OK button, and then press Enter.
Notes:
• Voice Guidance is also activated by inserting the headphones into the headphone jack.
• To adjust the volume, use the volume buttons at the bottom part of the control panel.
Adjusting the Voice Guidance speech rate
1 From the home screen, select Settings > Device > Accessibility > Speech Rate.
2 Select the speech rate.
Enabling spoken passwords or personal identification
numbers
1 From the home screen, select Settings > Device > Accessibility > Speak Passwords/PINs.
2 Enable the setting.
Setting up and using the accessibility features 24