7. Install a new wiper blade coated with your preferred lubri-
cant and two screws.
8. Clean the PCR holders with 99%pure isopropyl alcohol.
Snap on to the ends of the PCR.
9. Install the PCR and holders. 10. With the waste chamber facing you, install the drum so
that the large gear is on the left side, spring on the small gear
facing down.
UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGEUNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
LEXMARK E 250/350/450 DRUM UNIT REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Los Angeles, California 90250 USA • Ph +1 310 280 9620 • Fx +1 310 838 7294 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SU
MMIT
To Next Page
Loading...
