I%9?%$##7-?':<31!#'89,!'aW'OWN'IWV(c'WRR
Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer power off while Programming System Code appears
on the display.
c!$,<
The printer is ready to receive print jobs.
c!#91!'L$-$?!#!-1'DF17M!'aW'OWN'IWV(c'WRR
The printer settings are being configured. Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer power off while Remote Management Active appears
on the display.
c!#9M!'B$B!%';%9#'31$-,$%,'@7-
The standard exit bin has reached its capacity. Remove paper from the standard exit bin to clear the message and
continue printing.
c!#9M!'B$B!%';%9#'31$-,$%,'961B61'@7-
Remove the stack of paper from the standard exit bin.
c!BE$F!'8$%1%7,?!
The toner cartridge is exhausted.
1 Remove the used toner cartridge, and then install a new one.
2 Press
to clear the message.
c!BE$F!'I8'f71
This is the early warning message for the photoconductor kit. The printer continues printing unless the value for the
Cartridge Alarm is changed from the printer control panel or set to On from the Supply Notifications Web page
(located on the Embedded Web Server).
If the setting is On, then the printer stops printing. Press
to select Continue and continue printing.
When the PC Kit Life Warning appears, order a new photoconductor kit.
c!3!117-?'1A!'B%7-1!%
Wait for the message to clear.
c!3!117-?'/71A961'%!BE$F7-?'#$<'$;;!F1'B%7-1'_6$E71<=
You selected No from the “Verify PC unit replaced” screen. Wait for the message to clear.
:"5$,%#("5+"/&3,+"#$,&-$%%(/$%
C0C
To Next Page
Loading...
