Lexmark E460DN - Page 126

J*':1$-,$%,'2:T'B9%1',73$@E!,
Try one or more of the following:
• The printer discards any data received through the USB port. Press to clear the message and continue printing.
• Make sure the USB Buffer menu item is not set to Disabled.
JQ'N99'#$-<';E$3A'9B179-3'7-31$EE!,
Try one or more of the following:
• Turn the printer off, and then remove extra flash options:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the excess flash memory.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
• Press
to clear the message and continue printing.
Q+'c9617-!'#$7-1!-$-F!'-!!,!,
The printer needs to have scheduled maintenance done. Order a maintenance kit, which contains a fuser and a
transfer roller. Contact Customer Support, and report the message.
Q)'I8'f71'E7;!'/$%-7-?
The photoconductor kit is near exhaustion.
Try one or more of the following:
• Replace the photoconductor kit.
• Press
to clear the message and continue printing.
Q)'c!BE$F!'I8'f71
The photoconductor kit is exhausted. Install a new photoconductor kit.
QQ=<<'8$%1%7,?!'73'E9/
Try one of the following:
• Remove the toner cartridge, shake it, and then reinstall it. Press
to clear the message and continue printing.
• Remove the toner cartridge, and then install a new one. Press
to clear the message and continue printing.
QQ=<<'8$%1%7,?!'-!$%E<'E9/
Try one of the following:
• Remove the toner cartridge, shake it, and then reinstall it. Press
to clear the message and continue printing.
• Remove the toner cartridge, and then install a new one. Press
to clear the message and continue printing.
:"5$,%#("5+"/&3,+"#$,&-$%%(/$%
C0*