EasyManua.ls Logo

Lexmark E460DN - Page 128

Lexmark E460DN
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Remove the jam.
4 Close both doors.
5 Press to continue printing.
0GG=<<'I$B!%'K$#
The message indicates either where the paper is jammed or the number of pages jammed.
1 To access the jam, try one or more of the following:
Remove Tray 1, and then depress the lever.
Open the front door, and then open the rear door.
2 Remove the jam.
3 Close any open doors or trays.
4 Press
to continue printing.
0G)=<<'I$B!%'K$#
The message indicates either where the paper is jammed or the number of pages jammed.
1 To access the jam, try one or more of the following:
Open the front door, and then open the rear door.
Remove Tray 1, and then depress the lever.
2 Remove the jam.
3 Close any open doors or trays.
4 Press
to continue printing.
0GJ=<<'I$B!%'K$#
The message indicates either where the paper is jammed or the number of pages jammed.
1 Remove the jam from the standard exit bin.
2 Check the paper size to ensure that it is supported by the printer.
3 Press
to continue printing.
0)"=<<'I$B!%'K$#
The message indicates either where the paper is jammed or the number of pages jammed.
1 To access the jam, try one or more of the following:
Remove Tray 1.
Open the front door, and then remove the photoconductor kit and toner cartridge unit.
Remove Tray 2.
2 Remove the jam.
3 Replace the photoconductor kit and toner cartridge unit if you removed it.
:"5$,%#("5+"/&3,+"#$,&-$%%(/$%
C0Q

Other manuals for Lexmark E460DN

Related product manuals