LDf(':2c('NS('IDI(c'IDNS'P:'8 (Dc
Paper could be caught between the photoconductor kit and the fuser. Check the paper path around the fuser area.
CAUTION—HOT SURFACE: The fuser and the inside of the printer near the fuser may be hot. To reduce the
risk of injury from a hot component, allow the surface to cool before removing paper from this area.
Clear any paper you see.
NS(c('LDh'T('(X8(::'NWO(c'PO'NS('IDI(c'IDNS
Contact Customer Support.
:1%!$&!,'M!%17F$E'E7-!3
These are possible solutions. Try one or more of the following:
NS('NWO(c'LDh':L(Dc'VS(O'IDI(c'P:'R(a'RcWL'D':I(8PRP8':W2c8(
From Print Properties, the Print dialog, or the printer control panel, select another tray or feeder to feed paper for
the job.
NS('NWO(c'8DcNcPa5('P:'a(R(8NP[(
Replace the toner cartridge.
LDf(':2c('NS('IDI(c'IDNS'P:'8 (Dc
Paper could be caught between the photoconductor kit and the fuser. Check the paper path around the fuser area.
Warning—Potential Damage: Do not touch the photoconductor on the underside of the photoconductor kit.
Use the cartridge handle whenever you are holding the cartridge.
CAUTION—HOT SURFACE: The fuser and the inside of the printer near the fuser may be hot. To reduce the
risk of injury from a hot component, allow the surface to cool before removing paper from this area.
Clear any paper you see.
NS(c('LDh'T('(X8(::'NWO(c'PO'NS('IDI(c'IDNS
Contact Customer Support.
=,!106$%2!!#+"/
CJH
To Next Page
Loading...
