7-&7-?'$-,'6-E7-&7-?'1%$<3
In addition to linking trays to each other, you can also link the multipurpose feeder to the trays.
7-&7-?'1%$<3
Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the next
linked tray. When the Size and Type settings are the same for any trays, the trays are automatically linked. The Size
and Type settings for all trays must be set from the Paper menu.
2-E7-&7-?'1%$<3
Unlinked trays have settings that are not the same as the settings of any other tray. To unlink a tray using the Paper
menu, change the Paper Type and Paper Size settings so that they do not match the settings of any other tray.
1 From the Paper menu, make sure the Type setting (for example, Plain Paper, letterhead, Custom Type <x>) for
the tray you want to unlink does not match the Type setting of any other tray.
If the name that best describes your paper is used by linked trays, assign a different Paper Type name to the tray,
such as Custom Type <x>, or assign your own custom name.
2 Make sure the Size setting (for example, letter, A4, statement) for the tray you want to unlink does not match the
Size setting of any other tray.
Note: Paper Size settings are not automatic; they must be set manually from the Paper menu.
Warning—Potential Damage: Do not assign a Paper Type name that does not accurately describe the type of paper
loaded in the tray. The temperature of the fuser varies according to the specified Paper Type. Paper may not be
properly processed if an inaccurate Paper Type is selected.
D337?-7-?'$'86319#'N<B!']"^'-$#!
Assign a Custom Type <x> name to a tray to link or unlink it. Associate the same Custom Type <x> name to each tray
that you want to link. Only trays with the same custom names assigned will link.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press
.
3 Press the down arrow button until Paper Menu appears, and then press .
4 Press the down arrow button until Paper Size/Type appears, and then press .
5 Press the down arrow button until appears next to the name of the tray, and then press .
The Paper Size menu appears.
6 Press
again.
The Paper Type menu appears.
7 Press the down arrow button until
Custom Type <x> or another custom name appears, and then press
.
Submitting selection appears, followed by Paper Menu.
.!(5+"/&3(3$,&("5&%3$7+(6#*&-$5+(
)H
To Next Page
Loading...
