EasyManua.ls Logo

Lexmark E460DN - Page 61

Lexmark E460DN
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If you enter an invalid PIN, the Invalid PIN screen appears.
To re-enter the PIN, make sure
Try again appears, and then press .
To cancel the PIN, press the down arrow button until
Cancel appears, and then press .
9 Press the down arrow button until appears next to the job you want to print, and then press .
I%7-17-?'7-;9%#$179-'B$?!3
See “Printing a menu settings page” on page 36 and “Printing a network setup page” on page 36 for more information
on printing these pages.
I%7-17-?'$';9-1'3$#BE!'E731
To print samples of the fonts currently available for your printer:
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press
.
3 Press the down arrow button until
Reports appears, and then press .
4 Press the down arrow button until
Print Fonts appears, and then press .
5 Press the down arrow button until appears next to PCL Fonts or PostScript Fonts, and then press
.
After the font sample list prints, Ready appears.
I%7-17-?'$',7%!F19%<'E731
A directory list shows the resources stored in flash memory or on the hard disk.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press
.
3 Press the down arrow button until
Reports appears, and then press .
4 Press the down arrow button until
Print Directory appears, and then press .
After the directory list prints, Ready appears.
I%7-17-?'1A!'B%7-1'_6$E71<'1!31'B$?!3
Print the print quality test pages to isolate print quality problems.
1 Turn the printer off.
2 Hold down
and the right arrow button while turning the printer on.
3 Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
8,+"#+"/
*C

Other manuals for Lexmark E460DN

Related product manuals