Lexmark E460DN - Menu Categories and Options

I$B!%'#!-6
a!;$6E1':96%F!'#!-6
Menu item Description
a!;$6E1':96%F!
Tray <x>
MP Feeder
Manual Paper
Manual Env
Sets a default paper source for all print jobs
Notes:
• From the Paper menu, Configure MP must be set to Cassette in order for
MP Feeder to appear as a menu setting.
• Tray 1 is the factory default setting.
• Only an installed paper source will appear as a menu setting.
• A paper source selected by a print job will override the Default Source
setting for the duration of the print job.
• If the same size and type of paper are in two trays and the Paper Size and
Paper Type settings match, the trays are automatically linked. When one
tray is empty, the job prints using the linked tray.
I$B!%':7\!bN<B!'#!-6
Menu item Description
N%$<']"^':7\!
A4
A5
A6
JIS B5
Executive
Folio
Legal
Letter
Oficio (Mexico)
Statement
Universal
Specifies the paper size loaded in each tray
Notes:
• Letter is the US factory default setting. A4 is the international factory
default setting.
• If the same size and type of paper are in two trays and the Paper Size and
Paper Type settings match, then the trays are automatically linked. The
multipurpose feeder may also be linked. When one tray is empty, the job
prints using paper from the linked tray.
• The A6 paper size is supported only in Tray 1 and the multipurpose
feeder.
Note: Only installed trays and feeders are listed in this menu.
:"5$,%#("5+"/&3,+"#$,&-$"1%
HQ