To set up a connection between the printer and a Bluetooth-enabled device:
1 Insert a USB Bluetooth adapter into the USB port located on the front of the printer.
W
F
I
I
P
R
I
N
T
I
N
G
Bluetooth Dongle Connected appears on the display.
Note: A Bluetooth adapter is not included with the printer.
2 From the printer control panel, press .
3 Press the arrow buttons to scroll to Bluetooth Setup, and then press .
4 Press the arrow buttons to scroll to Discovery, and then press .
5 Make sure Discovery is set to On. If necessary, press the arrow buttons to scroll to On, and then press .
The printer is now ready to accept a connection from a Bluetooth-enabled device.
6 Configure the Bluetooth-enabled device to set up a connection to the printer. For more information, see the
documentation for your Bluetooth device.
Note: If the Bluetooth Security Level on the printer is set to High, then you must enter a pass key.
Setting the Bluetooth security level
1 Insert a Bluetooth USB adapter into the USB port.
W
F
I
I
P
R
I
N
T
I
N
G
Printing
47
To Next Page
Loading...
