Lexmark MC3326 User Manual

HTTP/FTP Settings
Menu item Description
Enable HTTP Server
O
On*
Access the Embedded Web Server to monitor and manage the printer.
Enable HTTPS
O
On*
Configure the Hypertext Transfer Protocol Secure (HTTPS) settings.
Force HTTPS Connections
On
O*
Force the printer to use the HTTPS connections.
Enable FTP/TFTP
O
On*
Send files using FTP.
Local Domains Specify domain names for HTTP and FTP servers.
Note: This menu item appears only in the Embedded Web Server.
HTTP Proxy IP Address Configure the HTTP and FTP server settings.
FTP Proxy IP Address
HTTP Default IP Port
1–65535 (80*)
HTTPS Device Certificate
FTP Default IP Port
1–65535 (21*)
Timeout for HTTP/FTP
Requests
1–299 (30*)
Specify the amount of time before the server connection stops.
Retries for HTTP/FTP Requests
1–299 (3*)
Set the number of retries to connect to the HTTP/FTP server.
Note: An asterisk (*) next to a value indicates the factory default setting.
USB
Menu item Description
PCL SmartSwitch
O
On*
Set the printer to switch to PCL emulation when a print job received through a
USB port requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is o, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 130

Lexmark MC3326 Specifications

General

Print Speed (A4, Black)	24 ppm
Print Speed (A4, Color)	24 ppm
Print Speed (Letter, Black)	26 ppm
Print Speed (Letter, Color)	26 ppm
Standard Paper Input	250 sheets
Standard Memory	512 MB
Recommended Monthly Page Volume	600 - 2500 pages
Maximum Monthly Duty Cycle	50, 000 pages
Duplex Printing	Yes
Scan Technology	CIS
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Print Technology	Color Laser
Processor Speed	1 GHz
Connectivity	USB, Ethernet, Wi-Fi
Display	2.8-inch
Scan Resolution	600 x 600 dpi
Copy Speed	24 cpm