Lexmark MC3326 - Cloud Connector; Reports

Menu item Description
Default Print Permission Login Shows the default permission used for the user to print.
Note: This setting shows only when one or more Login Methods are created.
Security Reset Jumper
Enable “Guest” access*
No Eect
Specify user access to the printer.
Notes:
• The jumper is located beside a lock icon on the controller board.
• Enable “Guest” access gives anyone access to all aspects of the printer.
• No Eect may make access to the printer impossible when the required
security information is unavailable.
Minimum Password Length
0–32
Specify the password length.
Enable Password/PIN Reveal Show the password or personal identification number.
Note: An asterisk (*) next to a value indicates the factory default setting.
Cloud Connector
Menu item Description
Enable/Disable Connectors Enable a cloud storage provider.
Reports
Menu Settings Page
Menu item Description
Menu Settings Page Print a report that contains the printer menus.
Device
Menu item Description
Device Information Print a report that contains information about the printer.
Device Statistics Print a report about printer usage and supply status.
Profile List Print a list of profiles that are stored in the printer.
Asset Report Print a report that contains the printer serial number and model name.
Use printer menus 136