Lexmark MC3326 User Manual

Poor copy quality
Action Yes No
Step 1
a Clean the scanner glass and the ADF glass with a damp, soft,
lint‑free cloth. If your printer has a second ADF glass inside the
ADF, then also clean that glass.
For more information, see
“Cleaning the scanner” on page
158.
b Make sure that the document or photo is loaded facedown on
the upper left corner of the scanner glass.
c Copy the document or photo.
Is the copy quality satisfactory?
The problem is
solved.
Go to step 2.
Step 2
a Check the quality of the original document or photo.
b Adjust the scan quality settings.
c Copy the document or photo.
Is the copy quality satisfactory?
The problem is
solved.
Contact
customer
support.
Vertical dark streaks on output when scanning from the ADF
ABCDE
ABCDE
ABCDE
Leading edge
Trailing edge
Action Yes No
a Open the scanner cover.
b Using a damp, soft, lint‑free cloth, wipe the ADF glass pad.
Note: In some printer models, this location has an ADF glass
instead of a pad.
c Close the scanner cover.
d Scan the document.
Do vertical streaks appear on scanned documents?
Contact
customer
support.
The problem is
solved.
Troubleshoot a problem 222

Lexmark MC3326 Specifications

General

Print Speed (A4, Black)	24 ppm
Print Speed (A4, Color)	24 ppm
Print Speed (Letter, Black)	26 ppm
Print Speed (Letter, Color)	26 ppm
Standard Paper Input	250 sheets
Standard Memory	512 MB
Recommended Monthly Page Volume	600 - 2500 pages
Maximum Monthly Duty Cycle	50, 000 pages
Duplex Printing	Yes
Scan Technology	CIS
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Print Technology	Color Laser
Processor Speed	1 GHz
Connectivity	USB, Ethernet, Wi-Fi
Display	2.8-inch
Scan Resolution	600 x 600 dpi
Copy Speed	24 cpm