EasyManuals Logo

Lexmark MC3326 User Manual

Lexmark MC3326
254 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
4 In the Fax Number field, enter the fax number that etherFAX provided.
5 From the Fax Transport menu, select etherFAX.
6 Apply the changes.
Setting up the fax function using fax server
Notes:
This feature lets you send fax messages to a fax service provider that supports email receiving.
This feature supports outgoing fax messages only. To support fax receive, make sure that you have a
devicebased fax, such as analog fax, etherFAX, or Fax over IP (FoIP), configured in your printer.
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Settings > Fax.
3 From the Fax Mode menu, select Fax Server, and then click Save.
4 Click Fax Server Setup.
5 In the To Format
field,
type [#]@myfax.com, where [#] is the fax number and myfax.com is the fax
provider domain.
Notes:
If necessary,
configure
the Reply Address, Subject, or Message
fields.
To let the printer receive fax messages, enable the devicebased fax receive setting. Make sure that
you have a devicebased fax configured.
6 Click Save.
7 Click Fax Server Email Settings, and then do either of the following:
Enable Use Email SMTP Server.
Note: If the Email SMTP settings are not configured, then see
“Configuring the email SMTP settings
on page 32.
Configure the SMTP settings. For more information, contact your email service provider.
8 Apply the changes.
Setting up fax using a standard telephone line
Note: These instructions apply only to printers that support analog fax. For more information, see “Supported
fax” on page 24.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make
any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.
Set up, install, and configure 27

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MC3326 and is the answer not in the manual?

Lexmark MC3326 Specifications

General IconGeneral
Print Speed (A4, Black)24 ppm
Print Speed (A4, Color)24 ppm
Print Speed (Letter, Black)26 ppm
Print Speed (Letter, Color)26 ppm
Standard Paper Input250 sheets
Standard Memory512 MB
Recommended Monthly Page Volume600 - 2500 pages
Maximum Monthly Duty Cycle50, 000 pages
Duplex PrintingYes
Scan TechnologyCIS
FunctionsPrint, Copy, Scan, Fax
Copy Resolution600 x 600 dpi
Fax Speed33.6 Kbps
Print TechnologyColor Laser
Processor Speed1 GHz
ConnectivityUSB, Ethernet, Wi-Fi
Display2.8-inch
Scan Resolution600 x 600 dpi
Copy Speed24 cpm

Related product manuals