Paper jam in the tray
1
Remove the tray and the manual feeder.
2
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3
Insert the manual feeder and the tray.
4
Open the rear door.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
5
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
6
Close the door.
Paper jam in the manual feeder
1
Remove the tray and the manual feeder.
2
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
7
To Next Page
Loading...
