Lexmark MS310d Quick Refence Guide

‑ On
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of
the following:
• From the printer control panel, press to continue printing.
Note: The printer discards any data received through the USB port.
• Set the USB Buffer to Auto:
– If the printer is on a network, then access the Embedded Web Server.
1 Open a Web browser, and then type the printer IP address in the address field.
Notes:
• Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section.
• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2 Click Settings > Network/Ports > Standard USB.
3 In the USB Buffer field, enter 2.
4 Click Submit.
– If the printer is connected to a computer by a USB or parallel cable, then access the USB menu through the Local
Printer Settings Utility for Windows.
Insufficient memory error messages
Insufficient memory to collate job [37]
‑ On
‑ On
68

Lexmark MS310d Specifications

General

Print Technology	Laser
Duplex Printing	Yes
Processor Speed	800 MHz
Paper Input Capacity	250 sheets
Operating System Compatibility	Windows, Mac, Linux
Print Resolution (Black)	1200 x 1200 dpi
Connectivity	Ethernet
Media Sizes Supported	A4, A5, A6, Letter, Legal, Executive, B5, Envelopes
Functions	Print
Maximum Paper Size	Legal