Lexmark MS610 Series - Factory Defaults; Custom Home Message; Export Configuration File; Flash Drive Menu

Use To
Factory Defaults
Do Not Restore
Restore Now
Restore the printer factory default settings.
Notes:
• Do Not Restore is the factory default setting.
• Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in the RAM are deleted. Downloads
stored in the flash memory or on a hard disk are not
aected.
Custom Home Message
2
O
IP Address
Hostname
Contact Name
Location
Zero Configuration Name
Custom Text [x]
Select a custom home message that appears as an alternating
display of the printer status.
Note: O is the factory default setting.
Export Configuration File
1
Export
Export configuration files to a flash drive.
1
This menu item appears only in touch‑screen printer models.
2
This menu item appears only in non‑touch‑screen printer models.
Flash Drive menu
Note: This menu appears only in touch‑screen printer models.
Use To
Copies
1–999
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Paper Source
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Set a default paper source for all print jobs.
Note: Tray 1 (standard tray) is the factory default setting.
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Stack the pages of a print job in sequence when printing multiple copies.
Note: “(1,2,3) (1,2,3)” is the factory default setting.
Sides (Duplex)
1 sided
2 sided
Specify whether prints are on one side or on both sides of the paper.
Note: 1 sided is the factory default setting.
Understanding the printer menus 147