Lexmark MS610 Series - Separator Source; Blank Pages; Print Settings; Setup Menu

Use To
Separator Sheet Source
Tray [x]
Multipurpose Feeder
Specify the paper source for separator sheets.
Notes:
• Tray 1 (standard tray) is the factory default setting.
• From the Paper menu, Configure MP must be set to Cassette in order for
Multipurpose Feeder to appear as a menu setting.
Blank Pages
Do Not Print
Print
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
Print Settings
Setup menu
Use To
Printer Language
PCL Emulation
PS Emulation
Set the default printer language.
Notes:
• PCL Emulation is the factory default setting.
• PostScript emulation uses a PostScript interpreter for
processing print jobs.
• PCL Emulation uses a PCL interpreter for processing
print jobs.
• Setting a printer language default does not prevent a
software program from sending print jobs that use
another printer language.
Print Area
Normal
Whole Page
Set the logical and physical printable area.
Notes:
• Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the
Normal setting, the printer clips the image at the
boundary.
• Whole Page allows the image to be moved into the
non‑printable area
defined
by the Normal setting. This
setting aects only pages printed using a PCL 5e
interpreter and has no eect on pages printed using the
PCL XL or PostScript interpreter.
Understanding the printer menus 149