Use To
Timeouts
Job Hold Timeout
5–255 sec
Set the amount of time the printer waits for user intervention
before it holds jobs that require unavailable resources and
continues to print other jobs in the print queue.
Notes:
• 30 sec is the factory default setting.
• This menu appears only when a printer hard disk is installed.
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Max Auto Reboots
1–20
Set the printer to restart when an error is encountered.
Notes:
• Reboot always is the factory default setting for Auto Reboot.
• 5 is the factory default setting for Max Auto Reboots.
• If the printer performs the same number of automatic
reboots that is set in the printer within a certain amount of
time, then the printer shows the applicable error instead of
rebooting.
Error Recovery
Max Auto Reboots
1–20
Set the number of automatic reboots that the printer can perform.
Notes:
• 5 is the factory default setting.
• If the printer performs a number of automatic reboots that is
the same as the menu setting within a certain amount of
time, then the printer displays the applicable error instead of
rebooting.
Print Recovery
Auto Continue
Disabled
5–255
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Print Recovery
Jam Recovery
On
Off
Auto
Specify whether the printer reprints jammed pages.
Notes:
• Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
• On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
Print Recovery
Jam Assist
On
Off
Set the printer to check for jammed paper automatically.
Note: On is the factory default setting.
Understanding the printer menus 230
To Next Page
Loading...
Need help?
General
Weight and Dimensions
