Menu item Description
Printer Emulations
Emulator Security
Disable Printer Message Access
On*
O
Disable access to the printer message during emulation.
Fax Configuration
Fax Low Power Support
Disable Sleep
Permit Sleep
Auto*
Set fax to enter Sleep mode whenever the printer determines
that it should.
Note: This menu item appears only in some printer models.
Print Configuration
Font Sharpening
0–150 (24*)
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
Print Configuration
Print Density
Disabled*
1–5
Copy Density
Disabled*
1–5
Adjust the toner density when printing or copying documents.
Device Operations
Quiet Mode
O*
On
Set the printer to reduce the amount of noise that it makes
when printing.
Note: Enabling this setting slows down the overall
performance of the printer.
Device Operations
Panel Menus
Enable*
Disable
Set the printer to show the control panel menus.
Note: This menu item appears only in the Embedded Web
Server.
Device Operations
Safe Mode
O*
On
Set the printer to operate in a special mode, in which it attempts
to continue oering as much functionality as possible, despite
known issues.
For example, when set to On, and the duplex motor is
nonfunctional, the printer performs one‑sided printing of the
documents even if the job is two‑sided printing.
Device Operations
Minimum Copy Memory
20MB*
30MB
50MB
80MB
100MB
Set the memory allocation for storing copy jobs.
Note: The values appear only if the amount of installed
DRAM is at least twice the amount of the value.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 70
To Next Page
Loading...
