Menu item Description
Caller ID
O
On*
Alternate
Show the telephone number of the person sending the fax.
Note: This menu item appears only if multiple caller ID patterns are supported,
and Fax Mode is set to Analog.
Fax Number Masking
O*
From Left
From Right
Specify the format for masking an outgoing fax number.
Digits to Mask
0–58 (0*)
Specify the number of digits to mask in an outgoing fax number.
Enable Line Connected
Detection
On*
O
Determine whether a telephone line is connected to the printer.
Note: Detection takes place when turning on the printer and before each call.
Enable Extension in Use
Support
On
O*
Determine whether a telephone line is used by another device such as another
phone on the same line.
Note: This menu item is monitored continuously after turning on the printer.
Optimize Fax Compatibility Configure the printer fax functionality for optimal compatibility with other fax
machines.
Fax Transport
Analog*
etherFAX
None
HTTPS Fax
Set the fax transport method.
Note: An asterisk (*) next to a value indicates the factory default setting.
Fax Send Settings
Menu item Description
Resolution
Standard*
Fine
Super Fine
Ultra Fine
Set the resolution of the scanned image.
Note: A higher resolution increases fax transmission time and requires higher
memory.
Original Size
[List of paper sizes]
Specify the size of the original document.
Note: Mixed Sizes is the U.S. factory default setting. A4 is the international
factory default setting.
Orientation
Portrait*
Landscape
Specify the orientation of the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 88
To Next Page
Loading...
