EasyManua.ls Logo

Lexmark MX610 - Setting Up and Using the Home Screen Applications; Finding the IP Address of the Printer

Lexmark MX610
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Locate the lever, and then pull it down to release the jam.
3 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
4 Insert the tray.
5 From the printer control panel, touch Done to clear the message
and continue printing.
[x]page jam, clear manual
feeder. [25y.xx]
1 From the multipurpose feeder, firmly grasp the jammed paper on
each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
2 Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.
3 Reload paper into the multipurpose feeder.
Note: Make sure the paper guide lightly rests against the edge of
the paper.
4 From the printer control panel, touch Done to clear the message
and continue printing.
[x]page jam, open tray [x]. [24y.xx]
1 Pull out the tray completely.
Note: The message on the printer display indicates the tray
where the jammed paper is located.
21

Other manuals for Lexmark MX610

Related product manuals