14 Gently remove the duplex from the machine.
Duplex (MX81x) removal
1 Remove the top cover. See “Top cover removal” on page 561.
2 Remove the left cover. See “Left cover removal (MX71x)” on page 416.
3 Remove the rear door. See “Rear door removal” on page 549.
4 Remove the rear lower cover. See “Rear lower cover removal” on page 551.
5 Remove the PCBA housing. See “Board housing removal” on page 431.
6 Remove the fuser access door. See “Fuser access door removal” on page 557.
7 Remove the duplex motor. See “Duplex motor removal” on page 553.
8 Remove the media tray. See “Media tray removal” on page 538.
9 Remove the pick roller assembly. See “Pick roller assembly removal” on page 541.
10 Remove the media feeder. See “Media feeder removal” on page 429.
7463
Repair information
530
To Next Page
Loading...
