What to do if Lexmark All in One Printer says 'Unsupported disk'?
If your Lexmark All in One Printer displays 'Unsupported disk', remove the unsupported printer hard disk, and then insert a supported one.
What to do if Lexmark All in One Printer shows 'Memory full'?
If your Lexmark All in One Printer displays a 'Memory full' message, you can try the following: * Touch 'Cancel job' on the printer control panel to clear the message. * Install additional printer memory.
What to do if Lexmark All in One Printer says 'Cartridge nearly low'?
If your Lexmark All in One Printer shows 'Cartridge nearly low', you can touch 'Continue' on the printer control panel to clear the message and continue printing, if necessary.
How to resolve 'Install Tray [x]' message on Lexmark MX711de All in One Printer?
If your Lexmark All in One Printer displays 'Install Tray [x]', try the following: * Install the specified tray: 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet. 3. Install the specified tray. 4. Connect the power cord to a properly grounded electrical outlet. 5. Turn the printer back on. * Cancel the print job. * Reset the active bin.
How to fix 'Network [x] software error' on Lexmark MX711de All in One Printer?
Try one or more of the following: * From the printer control panel, touch Continue to continue printing. * Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
What to do if Lexmark MX711de says 'Close door or insert cartridge'?
If your Lexmark All in One Printer shows 'Close door or insert cartridge', it means the toner cartridge is either missing or not correctly installed. You should insert the cartridge and ensure that all doors and covers are properly closed.
What to do when Lexmark MX711de All in One Printer says 'Replace imaging unit, 0 estimated pages remain'?
If your Lexmark All in One Printer displays 'Replace imaging unit, 0 estimated pages remain', replace the imaging unit to clear the message and continue printing.
Why is fax disabled on my Lexmark All in One Printer?
To enable faxing on your Lexmark All in One Printer, connect the printer to an analog phone line.
What to do if Lexmark MX711de says 'Battery charge low'?
If your Lexmark All in One Printer displays 'Battery charge low', charge the battery.
How to fix 'Fax memory full' error on Lexmark MX711de All in One Printer?
If your Lexmark All in One Printer's fax memory is full, follow these steps: 1. From the control panel, touch 'Continue' to clear the message and cancel the fax job. 2. Reduce the fax resolution or the number of pages. 3. Send the fax job again.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 4 s |
| Print speed (black, normal quality, A4/US Letter) | 66 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 40 ppm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | Scan |
| Digital sender | No |
| Maximum duty cycle | 300000 pages per month |
| Page description languages | PCL 5e, PCL 6, PDF 1.7, PostScript 3 |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | - DPI |
| Copy speed (black, normal quality, A4) | 66 cpm |
| Scanner type | Flatbed scanner |
| Maximum scan area | Legal (216 x 356) mm |
| Optical scanning resolution | 600 x 600 DPI |
| Faxing | Mono faxing |
| Modem speed | 33.6 Kbit/s |
| Total input capacity | 650 sheets |
| Total output capacity | 550 sheets |
| Maximum input capacity | 3300 sheets |
| Envelopes sizes | 7 3/4, 9, 10, B5, C5, DL |
| Maximum print size | 216 x 356 mm |
| Paper tray media types | Envelopes, Plain paper, Transparencies |
| Paper tray media weight | 60 - 176 g/m² |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Display | LCD |
| Control type | Touch |
| Display diagonal | 10.1 \ |
| Market positioning | Business |
| Direct printing | - |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 2 |
| Internal memory | 1024 MB |
| Processor frequency | 800 MHz |
| Maximum internal memory | 3072 MB |
| Sound pressure level (printing) | 58 dB |
| Power consumption (average operating) | 960 W |
| Operating temperature (T-T) | 16 - 32 °C |
| Operating relative humidity (H-H) | 8 - 80 % |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Windows operating systems supported | Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
| Sustainability certificates | ENERGY STAR |
| Certification | CAN/CSA-C22.2 60950-1, CSA E60825-1, ICES-003 A, BSMI A, CNS 13438, VCCI A, US FDA, FCC A, UL 60950-1, IEC 320-1, EN/IEC 60320-1, CE A, CB IEC 60950-1, EN 62311, EN 60950-1, EN/IEC 61000-3, EN 55022 A, EN 55024, EN/IEC 60825-1, GS (TÜV), SEMKO, UL AR, CS, TÜV Rh, SMA C-tick A, CCC A, CISPIR 22 A, EK, N, ECMA-370, TED |
Weight and Dimensions| Depth | 548 mm |
|---|---|
| Width | 727 mm |
| Height | 578 mm |
| Weight | 43300 g |
To Next Page
