How to Copy?
1. To use copy function
- load paper face up on ADF or paper face down on Flatbed.
- touch “Copy” icon on the touch panel.
- press keypad to set number of copies.
- press start button or “Copy It” to start copying.
- to change paper sizes
- touch “Copy from” for original size of document and touch “Copy to” for the paper source.
- to copy duplex
- touch “Sides (Duplex)” to change the settings.
- to use overlay, paper saver and booklet
- touch "Advanced Options"
Note: Printers have a default copy settings that is most likely configured to the size commonly used so
that changing settings is not necessary.
To Next Page
Loading...
