5 Measure L1, L2, T1, T2, R1, R2, B1, and B2 data points as shown in the following image.
6 Determine the following calculations:
• L2-L1 = ___
• R2-R1 = ___
• T2-T1 = ___
• B2-B1 = ___
7 Determine whether the printer passes or fails the skew specifications based on the values listed in the following
table:
# (L2-L1) (R2-R1) (T2-T1) (B2-B1)
Letter Less than or equal to 1.4
mm
Less than or equal to 1.4
mm
Less than or equal to 1 mm Less than or equal to 1 mm
A4 Less than or equal to 1.5
mm
Less than or equal to 1.5
mm
Legal Less than or equal to 1.8
mm
Less than or equal to 1.8
mm
7463
Repair information
403
To Next Page
Loading...
