Lexmark MX710 E-Mail Guide

E-mail guide
You can send an e-mail from the printer by typing the e-mail address, using a shortcut number, or using the address book.
Sending an e-mail using the printer control panel
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
Note: To avoid a cropped image, make sure that the size of the original document and the copy paper size are the same.
3 From the home screen, navigate to:
E-mail > Recipient(s)
4 Type the e‑mail address, or press # using the keypad, and then enter the shortcut number.
Notes:
• To enter additional recipients, touch Next address, and then enter the address or shortcut number you want to add.
• You can also enter an e‑mail address using the address book.
5 Touch Done > Send It.
Sending an e‑mail using a shortcut number
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
3 Press #, then enter the shortcut number using the keypad, and then touch .
Note: To enter additional recipients, touch Next address, and then enter the address or shortcut number that you want
to add.
4 Touch Send It.
Sending an e‑mail using the address book
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
E-mail guide
Page 1 of 4

Lexmark MX710 Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Scan Type	Flatbed, ADF
Duplex Printing	Yes
Monthly Duty Cycle	Up to 300, 000 pages
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 Kbps
Mobile Printing	Yes
Operating Systems Supported	Windows, Mac OS, Linux
ADF Capacity	100 sheets
Maximum Memory	3072 MB
Standard Input Capacity	650 pages
Maximum Input Capacity	3, 300 sheets
Standard Output Capacity	500 pages
Display	color touch screen
Connectivity	USB, Gigabit Ethernet
Processor	800 MHz
Hard Disk	320 GB
Scan Resolution	600 x 600 dpi
Standard Memory	1 GB
Scan Speed	Up to 70 spm