Regular toner cartridges
Item Worldwide
Ultra high yield toner cartridge 58D0UA0
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail before the toner
exhaustion.
Item Lexmark Return Program
Corporate Return Program
*
Regular
Imaging unit 58D0Z00 58D0Z0E 58D0ZA0
* This imaging unit is available only for contract‑managed printers. For more information, contact your Lexmark
representative or system administrator.
Ordering a staple cartridge
Part name Part number
Staple cartridge 35S8500
Ordering a maintenance kit
To identify the supported fuser type, open door A, and then remove the toner cartridge and the imaging unit.
Find the two‑digit fuser type in front of the fuser, for example, 00 or 01.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
Notes:
• Using certain types of paper may require more frequent replacement of the maintenance kit.
• The separator assembly, fuser, pick roller assembly, and transfer roller are included in the maintenance
kit and can be ordered individually and replaced if necessary.
• For more information on replacing the maintenance kit, see the documentation that came with the kit.
Return Program fuser maintenance kits
Fuser maintenance kit
type
Part number
Type 00 41X2233
Type 01 41X2234
Type 02 41X2235
Type 03 41X2236
Type 04 41X2237
Type 11 41X2242
Type 13 41X2243
Maintaining the printer 158
To Next Page
Loading...
