Adjusting toner darkness
1 From the control panel, navigate to:
Settings > Print > Quality
For non-touch-screen printer models, press
to navigate through the settings.
2 From the Darkness menu, adjust the setting.
3 Apply the changes.
Job prints from the wrong tray or on the wrong paper
Action Yes No
Step 1
a Check if you are printing on the correct paper.
b Print the document.
Is the document printed on the correct paper?
Go to step 2. Load the correct
paper size and paper
type.
Step 2
a Depending on your operating system, specify the paper size
and paper type from the Printing Preferences or Print dialog.
Notes:
• Make sure that the settings match the paper loaded in
the tray.
• You can also change the settings on the printer control
panel.
b Print the document.
Is the document printed from the correct tray or on the correct
paper?
The problem is
solved.
Go to step 3.
Step 3
a Check if the trays are not linked.
For more information, see
“Linking trays” on page 37.
b Print the document.
Is the document printed from the correct tray?
The problem is
solved.
Contact
customer
support.
Troubleshooting 247
To Next Page
Loading...
