Lexmark C912
Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels.
The Lexmark C912 supports stocks up to 216 g/m
2
.
The following table lists the maximum weights supported by the standard tray and the multipurpose feeder.
Overview of card stock and label support
Paper source
Card stock Labels
Index Bristol Paper Vinyl
Standard tray —
180 g/m
2
—
Multipurpose feeder
216 g/m
2
180 g/m
2
300 g/m
2
Media Specifications
Labels Width: 210–216 mm (8.3–8.5 in.)
Length: 279–297 mm (11–11.7 in.)
Weight:
180 g/m
2
Thickness: 0.13–0.20 mm (0.005–0.008 in.)
Smoothness: 100–400 Sheffield*
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Up to 216 g/m
2
For paper and transparency specifications, refer to the printer publications CD.
Printer specifications 58
To Next Page
Loading...
Need help?
General
